Description

The Hans Christian 33T (HC33T) was designed by Harwood Ives and built by Hans Christian Yachts. Like all Hans Christians, Re Metau is a well-built double-ender, solid and comfortably seaworthy. The cockpit is safe, and the boat can easily be sailed single-handed. This timeless classic with teak above and below decks is extremely well equipped and customized with everything you need for full time cruising; from rigging less than 10 years old, an arch with dinghy davits and raised cockpit seats, a water-maker, to the recent dinghy and outboard, to name just a few.


Viewing by appointment at our Grenada Office 473 422 6418 info(at)clarkeandcartercaribbean.com

Specifications

Accommodation

The layout is as spacious as many 40-foot boats and sleeps 4 comfortably. There is full standing (6.1ft) headroom and good ventilation throughout via large overhead hatches, bronze opening portholes, dorade vents with stainless cowls, and a wide companionway all screened.


Forward is the enclosed anchor locker. Aft of this locker is the head with an electric macerator toilet. The separate shower stall and single stainless-steel sink vanity with marble countertop both have pressurised hot and cold water.


Aft of this is a Queen-sized Pullman berth lies to port with reading lights, bookshelves, oil lamp, drawers and locker storage beneath. The 2 bins beneath the berth are large enough to stow spare sails and much, much, more. Separate hanging lockers and more drawer storage lies to starboard.


Next to port is an L shaped settee with fixed dinette, and another long settee to starboard that can quickly convert into a bunk bed. Everything has stowage behind and beneath, and shelves run along the hull.


Located to port at the foot of the companionway is the galley, equipped with a 3-burner gimbled stove and oven, a double stainless-steel sink, also with pressurised hot and cold water, and refrigerator with large freezer box. Massive amounts of practical storage continues via numerous drawers, lockers, and cabinets.


The Navigation Station is to starboard with storage below the chart table. The bulk of the electrical systems equipment are concealed in a sizable equipment locker located aft of the bulkhead where the electrical panel is mounted. The engine is located under the companionway steps.

Construction

Built in Taiwan by Hans Christian Yachts Re Metau is solid fiberglass with fully encapsulated iron keel with keel hung rudder. The decks are teak. The hull was last anti-fouled in July 2020

Equipment

Rocna Vulcan 25kg anchor
Fortress FX-16
225ft 5/16th G4 chain
75ft 5/16th G4 chain & 250ft 5/8th inch rode
Dual bronze anchor davit/bow roller
Lofrans Tigress 1500 windlass under custom cover
2 x Quick windlass remote
Guardian G16 stern anchor with 100ft rode
Dyneema Amsteel lifelines with 2 midship boarding gates
316 stainless-steel tube cockpit rails
Full fore and aft Stamoid Top 12.64 oz. Desert custom awnings
1 316 custom arch with wind generator mount, solar panel mounts, antenna mounts, stern light, dinghy davits, outboard mount, raised cockpit seats, folding swim ladder, push pit platform, and stern boarding gate
Teak cockpit table and cup holder hanging rack
Stamoid Top 12.64 oz. Desert covered cockpit cushions
Sunbrella dodger, anchor awning, aft curtain (under arch), weather clothes with pockets, and rail bags
Sunbrella Pro-Techt Mantis Umbrellas with rail mounts
Bazooka Tubbie speakers in cockpit
Remote controlled, solar, and switch-controlled LED lights
Propane Magma stainless kettle BBQ grill with quick release to main line
2 x Lee s Tackle fishing rod holders
2 x SCUBA tank rack, 1 x tank (needs hydro-tested)
6 x jerry jugs under custom covers, secured in rack: 2 x water, 3 x diesel, 2 x gas
Various fenders and dock lines
Custom made Sunbrella covers for many deck




Zar mini 10ft dinghy with aluminium floor, custom chaps and seat bag, anchor locker w/anchor and rode (new in 2019)
15 Hp Yamaha outboard 2 Stroke (new in 2019)
Sailrite sewing machine
Excel on-demand water heater
Spectra Ventura 200T MPC Watermaker
17lb composite propane tank w/quick release hose under custom cover (tanks are interchangeable)
10 lb. aluminum horizontal propane tank w/quick release hose (tanks are interchangeable)
Jabsco Compact Electric Head w/macerator
Rule sump pump w/ float switch
Froli mattress springs
2 Dan Haan and 1 Weems & Plath brass hanging oil lanterns
Tank Tender for Fuel and Water tanks
Force 10 Cozy Cabin propane heater
Dometic Marine Air 2 Air Conditioner w/ 50 or 60 Hz capable compressor (may need serviced)
Kenwood ex704 Bluetooth stereo
Alpine amplifier
Polk Audio component speakers
Bazooka subwoofer
Force-10 3 burner gimbled stove and oven
Frigoboat refrigerator/freezer w/12V Compressor and keel cooler
Whale Gusher Galley foot pump for salt water at galley sink
Shurflo Extreme TM Series 12v water pump
5 x 12v Fans
Numerous fasteners, plumbing, electrical, and rigging spares
Full complement of tools including power, Makita cordless & hand
Assorted cutlery, crockery & linens
Scuba/snorkel gear, hooka rig w/110v air compressor
Deep sea fishing rods, Shimano & Spheros reels, nets, and other gear
Inflatable paddle board & paddle, floating chairs, 110v air pump

Navigation Equipment

Garmin 740s Chartplotter
Garmin 78s Handheld GPS
Raymarine EV200/3 Auto pilot
Tacktick MN100 depth & speed log
Kestrel 2500 weather meter/digital altimeter/thermometer/anemometer
Standard Horizon VHF radio with GPS/AIS
Standard Horizon RAM remote control mic with integral speaker
ICOM 802 SSB with backstay antenna
AT-140 antenna tuner
Kaito portable SSB receiver
Inreach Satellite Messenger
LED Nav lights with photocell-controlled mast light
Lighted Ritchie compass under custom cover
Weams & Plath clock, Trintec barometer with level, and brass thermometer
Assorted paper & electronic charts of US, East & Western Caribbean
Night vision scope, distance scope, Bushnell binoculars

Engine(s)

A Yanmar 3JH5E 39hp engine, with dual Racor fuel filters, was installed new in 2016, and only has 356 hrs. It has been regularly serviced, the last of which was at the end of 2021. Shaft transmission drives a 3 bladed fixed bronze prop. In 2020, a dripless PSS shaft seal and a new cutlass bearing was installed.

Electrics

DC12V; AC 110V
1 x Trojan sealed gel starter battery
6 x Trojan t-105 house batteries - 630Ah
ProMariner ProNautic 12-50 battery charger
Xantrex Linklife battery monitor
Nanopulser battery desulfator
Failsafe galvanic isolator
50ft 120V 30amp Dockside Electrical Cable fully covered in Sunbrella
2 x 295 Watts solar panels - Total 590Watts
MPPT Series ML4860 Solar charger
NHHC-12 Flex Charger with load diversion
1 x Ecletic Energy/D400 wind generator
Portable Honda 2000i generator
Invertec 1500 Pure Sine Wave inverter
Full LED cabin lights, Nav lights, spreaders, and photocell sensor mast light
2 Propane systems with separate solenoid shut-off switches
Sena intercom headset

Safety Equipment

2 x Mustang inflatable PFDs w/harness
2 x Wichard dual tethers with port and starboard jacklines
6 Type-II adult life jackets
Lifesling man overboard sling
1 x Whale Double Acting Mk 5 bilge pump
1 low water and 1 high water electric bilge pumps with Aqualarm Smart Pump Switch and yellow/red running notification lights
3 x ABC dry chemical fire extinguishers
EPIRB - GMT AccuSat
Emergency tiller
2 x SEA-TAGS wristbands man overboard alarm systems
First aid kit
Anchor drag alarm

Disclaimer

The company normally acts as broker for the vendor who unless otherwise stated is not selling in the course of a business. Whilst every care has been taken in the preparation of these particulars the correctness is not guaranteed and they are intended as a guide only and do not constitute a part of any contract. A prospective buyer is strongly advised to check these particulars and where appropriate and at his own expense to employ a qualified marine surveyor to carry out a survey and/or to have an engine trial conducted which if conducted by us shall not imply any liability on our part.