Description

Purpose / Description: This boat has been designed for the requirements of Port Authority (Harbor) or Construction Companies for the purpose of regular assistance of towing, pushing and Line Handing in coastal area.

Length (moulded & LOA) : 17.00 m /17.50
Beam (moulded & OA) : 7.70 m / 8.20
Depth (moulded) : 3.80 m
Draft : 2.95 m max
Construction Hull/ Wheelhouse : Steel / Steel
2X Caterpillar C18 885@2200rpm Total: 1770hp



Cat C18 873HP @2200
Model: Cat C18
Brand: Caterpillar
[Product Type: Engine]

Product Specifications
Stroke 182.88 mm (7.20in)
Bore 144.78 mm (5.70in)
Height 1178.56 mm (46.40in)
Width 1056.64 mm (41.60in)
Length 1557.02 mm (61.30in)
Power 873 HP (650.91kw)
Weight 1718.21 kg (3788.00lbs)
Displacement 18124.1 cm3 (18.12L, 1106.00in3)
Rated Speed 2200 r/min

Specifications

Engine(s)

SPECIFICATIONS
I-6, 4-Stroke-Cycle-Diesel
Displacement. . . . . . . . . . . . . . . . . . . 18.1 L (1106 in3
)
Rated Engine Speed . . . . . . . . . . . . . . . . . . . . . . 2200
Bore. . . . . . . . . . . . . . . . . . . . . . . . . . . 145 mm (5.7 in.)
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . 183 mm (7.2 in.)
Aspiration . . . . . . . . . . . . . Turbocharged-Aftercooled
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic
Cooling System . . . . . . . . . . Heat Exchanger Cooled
Weight, Net Dry (approx.). . . . . . . . 1673 kg (3688 lb)
Refill Capacity
Cooling System . . . . . . . . . . . . . . . 45.8 L (12.1 gal)
Lube Oil System . . . . . . . . . . . . . . . . 64 L (16.9 gal)
Oil Change Interval . . . . . . . . . . . . . . . . . . . 500 hours
Caterpillar Diesel Engine Oil 10W30 or 15W40
Rotation (from flywheel end). . . . . Counterclockwise
Flywheel and flywheel
housing . . . . . . . . . . . . . . . SAE No. 1 or SAE No. 0
Flywheel Teeth
SAE No. 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
SAE No. 0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Maximum Exhaust
Backpressure . . . . . . . . . . 6.7 kPa (26.9 in. water)



Air Inlet System
Corrosion-resistant sea water aftercooler, air
cleaner/fumes disposal (closed system), jacket
water cooled turbocharger, turbocharger inlet OD
straight connection
Control System
Electronic governing (A4), programmable low idle,
electronic diagnostics and fault logging, fuel/air
ratio control, electronic throttle position sensor
Cooling System
Thermostat and housing, block heater (1500W,
120V AC current), gear-driven jacket water pump,
self priming, gear-driven sea water pump with
bronze impeller, titanium plate type heat exchanger
Exhaust System
Watercooled exhaust manifold and turbocharger,
round-flanged outlet
Flywheel and Flywheel Housings
Standard SAE No. 1 flywheel and flywheel housing,
113 teeth, SAE standard rotation; optional SAE
No. 0 flywheel and flywheel housing, 136 teeth,
SAE standard rotation
Fuel System
Fuel filter, RH service on port, LH service on
starboard; fuel transfer pump; fuel priming pump;
flexible fuel lines

nstrumentation
Electric service meter, instrument panel (24V),
start/stop switch, emergency stop button,
maintenance due light, diagnostic light, warning
light, maintenance clear switch, start motor
magnetic switch, 15 and 3A breakers
Lube System
Crankcase breather; oil cooler; spin-on oil filter, RH
service on port, LH service on starboard; center
sump deep oil pan; oil filler; dipstick, RH service on
port, LH service on starboard; gear-driven oil pump
Mounting System
Adjustable front support
Power Take-Offs
Hydraulic pump drive, SAE A, 11 tooth spline,
46 ft-lbs max torque, counterclockwise as viewed
from front of the engine looking into the drive and
turns 1.41 x engine speed, 292 mm crankshaft
pulley, 15.88 mm width
General
Vibration damper; lifting eyes, RH or LH service
options; literature; variable engine wiring; upper
rear-facing customer wiring connector and service
tool connections
ISO Certification
Factory-designed systems built at Caterpillar
ISO 9001:2000 certified facilities.

Disclaimer

The details of this vessel is offered in good faith but cannot be guaranteed. Vessels specification can be changed without notice. We warrant the accuracy of this information and warrant the conditions of the vessel. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Turkish Workboat Builder & Ship Supplier | Tug, Pilot Boats, Workboats, Pilot Boats & More
Turkey-based workboat builder and ship supplier offering new build and second-hand ferries, RORO vessels, Ro Pax, passenger ships, fishing boats, tugboats, barges, dredgers, and various other marine vessels worldwide.
As a leading workboat builder based in Turkey, we provide a wide range of new build and second-hand marine vessels. We engineer custom solutions for our clients and offer a diverse fleet to meet various maritime needs.
Our Range of Vessel Types Includes:
• Passenger Vessels: Car Ferry, RORO (Roll-on/Roll-off), Ro Pax (Roll-on/Roll-off Passenger), Cruise Ship, Day Passenger Vessel
• Fishing Vessels: Fishing Vessel (Purse Seiner, Long Liner, Freezing Stern Trawler)
• Towing and Maneuvering: Tug Boat, ASD (Azimuth Stern Drive Tug), AHST (Anchor Handling Supply Tug)
• Supply and Support: Supply Vessel, Rescue Boat, Crew Boat, Pilot Boat, Patrol Boat
• Cargo and Transportation: Barge, Split Hopper Barge, Pontoon, Landing Craft
• Dredging and Specialized: Dredger, Fish Farm Catamaran, Multicat, HDPE Boat
• Environmental Protection: Oil Pollution Vessel, Oil Skimmer, Multi-Purpose Oil Recovery Vessel – equipped with oil and debris collecting systems and recovered oil handling systems, 1 and can also be used for boom laying, dispersant spraying, firefighting, beach washing, emergency fuel transfer, equipment/personnel transport.

Worldwide Delivery:

We deliver your vessels worldwide by road, sea, or air. Self-propelled delivery options are also available upon request. Please note that vessel prices do not include delivery costs. Istanbul, Turkey is the delivery port for all new build vessels. The location of used vessels may vary. We offer special delivery rates to the USA.